H-Lift Manual Chain Pulley Block / Chain Hoist CH-E Type:
Automatic double pawl braking system
Lightweight robust construction
Low effort to lift maximum load
Fully forged hooks
Fully machines lift wheel
ISO high grade alloy load chain
Zinc plated hand chain as standard
Extra thick asbestos free friction discs
Double cover protection
Durable baked enamel paint protection
Zinc plated RUD chain from Germany or FEC chain from Japan available upon request
Overload protection device available upon request
Complies with EC Council Directive 2006/42/EC Machinery, AS 1418.2
Remarks: Hoists with the lift in other lengths are also available.
Installation and Commissioning
The erection procedure will vary with the equipment and should be carried out in accordance with the suppliers instructions
Paying attention to the following matters:
Prior to installation inspect the equipment to ensure no damage has occurred in store or transit.
Ensure the support structure is adequate for the full loads that will imposed, is tested and marked with the SWL.
When erecting trolleys ensure they are correctly set for the beam width and that the track is fitted with end stops which
Engage with the trolley frame or wheel tread. The track should remain level at all loads up to the maximum.
When suspending appliances by a top hook ensure the support fits freely into the seat of the hook.
After erection ensure that the chain/wire rope hangs freely and is not twisted or knotted.
With power operated blocks the supply should be connected by a suitably Qualified Person taking account of any statutory or
Technical requirements (eg Electricity at Work Regulations, Pressure Systems and Transportable Gas Containers Regulations).
Test run to ensure the free and correct movement of the chain/rope. Check the operation of the brake. Check direction of control command, position and operation of travel limits and safety devices.
| Model | CHE005 | CHE010 | CHE015 | CHE020 | CHE030 | CHE050 | CHE100 | CHE200 |
| Capacity (t) | 0.5 | 1 | 1.5 | 2 | 3 | 5 | 10 | 20 |
| Standard Lift (m) | 2.5 | 2.5 | 2.5 | 3 | 3 | 3 | 3 | 3 |
| Proof Load (kN) | 7.35 | 14.7 | 22.1 | 29.4 | 44.1 | 73.5 | 147 | 245 |
| Effort Required to Lift Rated Load (N) | 200 | 320 | 360 | 365 | 385 | 135 | 435 | 435x2 |
| No. of Falls of Load Chain | 1 | 2 | 4 | 8 |
| Load Chain (mm) | 6x18 | 8x24 | 10x30 |
| Dimensions (mm) | A | 137 | 148 | 161 | 161 | 161 | 186 | 190 | 209 |
| B | 137 | 162 | 187 | 187 | 210 | 253 | 384 | 625 |
| C | 270 | 317 | 399 | 414 | 465 | 636 | 798 | 890 |
| D | 35 | 40 | 45 | 50 | 58 | 64 | 85 | 110 |
| K | 27 | 31 | 33 | 39 | 40 | 46 | 50 | 81 |
H-Lift, an ISO 9001 certified firm by Lloyd's Register and a member of LEEA(Lifting Equipment Engineers Association), specializes in the field of lifting & hoisting equipment, webbing and round sling, ratchet tie down and lashing equipment, chain & chain sling, wire rope and wire rope sling, material handling, rigging hardware & other products.
){kind=link}